Sneak Preview – Snack Size Swimbaits Prototype

Bait_teaser_pics_053

So after months of hard work there is finally light at the end of the tunnel. I am in the final stages of detail mold-making and finish testing on my new 7” three-piece hard swimbait. I am crafting these completely by hand at my shop in Novato, CA. There will be two types of floating wake baits as well as a sinking model. These things have incredible action. I will be going to Clear Lake this weekend to do some more testing. I’ll let you know how it goes.

If things keep going well they will be available in a couple months.

Basic Boat Repair – Part two: Fixing Minor Dings and chips

Dsc_0046

Now that your flake coat is in and set up, it is time to do the finish coat. For this step you will need an ultra-clear finish resin – surfboard resin will work great.

Dsc_0048

Step 3:
Start by taping off around the area to create a finish border. At this stage the resin will do one of two things depending on where the chip is located. More often than not it will be on the side or bottom of your boat, you may need so several coats with set time in between to achieve the right thickness without ending up with a drippy mess. Be sure to let a this set over night.

Depending on the overall shape of your boat you can choose to stop here, or keep going to achieve a perfect finish. . . since the boat I dinged is my new 2008 Champion I will continue.

Dsc_0004

Step 4 – Wet sanding:
At least 2 different grits of sand paper are needed here. I would recommend going a step further and using 3. Start with 600 grit black Emery cloth, moving to 1200 or 1500, and then finally 2000 or higher. The higher # the paper you use for the final steps the less work the polishing will be.

Dsc_0002

Small sanding block: What is a block? Most of you have seen the rubber sandpaper block at the hard ware store. This is what I am referring to, but it is also a term for leveling a surface in the automotive trade. Blocking is what is done when sanding paint or Bondo during body and paint work.

If you don’t have a small store-bought block, you can use a small, perfectly flat piece of wood, an eraser, or what I do is cannibalize one of my automotive blocks into a smaller version(see picture).

As you get started you will see the purpose of using the block is that it focuses on taking down the high spots with out making serious contact with the low spots. By the time you reach the low spots you should shift over to the finer sandpapers and level the whole area out smooth. This is called feathering. Once the area is feathered out and you have achieved a nice smooth finish across the area you are ready for buffing (If you still have low spots you go back to the drawing board with the resin build up – more often than not I do this at least once – what’s the point in doing something if you can’t do it again right?).

Onward:

Dsc_0055

Step 5 – Polishing/buffing:
This can be done by hand or with the help of a buffing wheel. These can be picked up relatively cheap at the hardware store. I recommend a light sheep’s wool or a foam type wheel. Choose a finish-grade buffing compound that can be found at any automotive or marine shop. Every buffing compound will have slight variances in the usage, so read the bottle before using.

For small projects, you can also use a pneumatic 90 degree grinder as well (see picture).

Make sure you cover your boat carpet before doing this, as buffing compound gets everywhere and it will save you time with the vacuum cleaner.

There you have it, I know this isn’t for everyone, but at the very least it will give an understanding of how it’s done.

AnglerTech: NetVibes, RSS Feeders & You

Wired_angler_netvibes

Note: AnglerTech is a feature that will highlight technology assets for anglers, and will feature guest bloggers on subjects of their expertise.

How to use virtual desktops to take all the best parts of the web with you, wherever you login.

Net who? R what? It seems to be modern technology’s way to give everything a cryptic acronym, but really these are simple, easy to use technologies that are super helpful to people who tend to be on the road a lot. Like, say, anglers.

So what is it? NetVibes is a website that lets you customize a webpage, using easy, drag-and-drop modules to make up a super personalized virtual web desktop. One of the main components of NetVibes is that it is an RSS Feed Aggregator. RSS (short for “Real Simple Syndication”), is a way to get headlines from your favorite news websites or blogs all in one place.

NetVibes is only one of several virtual desktops, but I really like how easy it is to use, and some of the other components (called “widgets”) that you can add to your page. Widgets range from weather reports you can customize by city, to to-do lists, web searches or more specialized services, like eBay keyword searches.

Why is this so helpful to anglers? Well, knowing that you can read your favorite BassMaster headlines, see all of your favorite web bookmarks, or find a weather forecast for the lake you are heading to next from on the road – whether on a laptop, or at a hotel or cafe PC – adds a little touch of the modern home on the road.

This, like a lot of things on the web, is easier to understand when you see it, which is why I have set up a shared NetVibes page you can all log into and play with. If you like what you see, then you can set up your own account.

Check it out:
Go to www.netvibes.com, look for the ‘sign in’ link at the upper right
Login: bassorific@gmail.com
Password: wiredangler

Feel free to mess around, add feeds, share links, etc. I’ll pop in there from time to time and make sure that havoc has not broken completely loose.

Some special features to pay attention to:
To add new feeds or widgets, click on the “add content” link on the upper right.
To rearrange content on the page, mouse over any module, and you can drag and drop it anywhere on the page you want
A whole new page can be added at the top by clicking on the grey text that reads “New Tab”

I encourage you to add your favorite websites to the bookmarks, leave notes for fellow visitors, or add RSS feeds you may know about. Have fun.

-A. Black

4 Steps to Simplify Your Bass Baits

045

So I was just doing a little spring cleaning on my boat, and it got me thinking about my on-boat tackle system. The system is my way of coping with the hundreds of tackle manufacturers out there and the thousands of choices in lure selection, which could all too easily lead to hours just trying to figure out what bait to use on a given day. Years ago I started sorting all my lures by type, and this evolved into a much more specific system. It’s 4 basic steps to stop the insanity.

1. Take all your baits from either your tackle box or bass boat and lay them out where you can see them.

2. Identify your favorites, and set them to one side. Put anything new and untried into another pile. Finally, take the ones you don’t use and the ones you have used and do not like OUT of your tackle box, or OFF the boat, and set them aside.

What to do with the stuff you don’t use? Well, unless I am attached to it I get rid of it. I use Ebay all the time, which has the added bonus of giving me cash to try new, experimental baits. I also set stuff aside to trade with friends, or to give to friend’s kids to start their tackle box. Just because it does not work for me, does not mean it might not work for someone else.

3. Start breaking down the remaining lures into types: crank baits, jigs, swimbaits, soft plastics, top-water, jerk baits, etc. The next step is to organize those into specific groups by running depth, by size and color ( or however you decide).

It’s easiest to start with your favorite baits – the ones you use 90% of the time. Take jigs, for example: I fish a lot of jigs. It has to be one of my favorite baits, but if you were to look on my boat you would never guess this is the case. I only have one Plano jig box, and I usually only have four colors. Why? These are my confidence colors. I do three types of jig fishing: deep structure fishing, shallow fishing, and flippin’. I don’t need ten brands and 50 color combos. I won’t preach one weight, size, color or any of that – this is going to vary between anglers, and everybody’s got their favorites – but I will say to limit yourself to whatever works best for you.

This system ensures that when I pick up my rod, no matter what bait is on it, I am not hearing that little voice in the back of my head saying, “are you sure?”

4. Finally, create a place in your tackle box, or a container on your boat that just has new stuff. I have a separate box on my boat labeled “new baits to try”. I will usually try new baits when I am fun fishing, and at that point, decide whether I am going to spend more time with it. If you find a winner, trade it out for something that has not been performing.

That’s it. As an example of how I have applied ‘the system‘, here’s a look into my crank bait boxes: I like to keep a good supply of just a handful of baits.

  • Norman DD 22’s & 10’s – an older, proven bait
  • Luhr Jenson Speed Traps
  • Lucky Craft LV 500’s
  • Specialty Tackle Junior D’s and Big Bites

. . . And that’s it.

When you think about it, what do you have to lose? Try this system, and who knows, the tackle weight off your boat may even save you gas and make your boat faster.

Basic Boat Repair – Part One: Fixing Minor Dings and Chips

If you have ever had any chip repair done on your boat , you know it can be very expensive. More than just the repair, if you factor in travel time to and from the shop (usually during the week), then add on time missed from work and you will wish you never ran in to that damn dock.

Glass_repair_tubby_trout_006

So unless you have major damage this DIY advice is for you.

Most chips are just minor cosmetics, and for less than the cost of one professional repair you can be on the road to fixing most all your small dings yourself.

What you will need:

A trip to Tap Plastics or a marine supplier (such as West Marine) will get you well on your way

Glass_repair_tubby_trout_009_exposu

  • Glitter flake or gel coat to match your boat*
  • Laminating resin (super clear)
  • Finish resin (surfboard sandable finish resin)
  • MEKP type hardener
  • Acetone
  • A package of cheap small brushes
  • Mixing cups and sticks
  • Masking tape

*Note: if you have a new boat you may be able to get your glitter or color gel for free or close to nothing from the boat company. (I have been working in the paint industry for years and you would not believe what glitter flake sell for – It sells by the ounce like crack)

Step 1

  • Clean the area to be fixed with a small amount of acetone on a rag.
  • Tape off area to avoid unnecessary clean up.

Step 2Glass_repair_tubby_trout_012_exposu

  • Mix a small amount of resin. Usually less than a half ounce will do for a small chip.
  • Add an equal amount of flake or if using a color gel add to match.
  • Add a few drops of hardener and you’re in business.
  • You want to keep this mixture pretty thick as a filler, so don’t be stingy with the flake after all it’s a freakin’ bass boat.
  • The flake will also serve as a good filler, so sometimes only one coat is necessary. If you are using a gel color a few coats may be necessary depending on the depth of the ding. This may require set up of the resin between coats. Avoid drips at all cost as this can show after you are done.
  • You will also want to stay below the final finish surface, the reason being that if on the final sanding of the clear finish coat the sandpaper goes into the flake, it will cause dull spots. This is for flake – if it is a solid color repair it can be wet sanded down and finish coated without worry of dullness.
  • Time between coats can vary between coats depending on weather conditions and types of resin also the amount of hardener used.

Glass_repair_tubby_trout_018

I will cover the next steps in the next segment in a few days

Interesting New Found Tackle Site: ‘Conquisatdor Tackle’

I was just browsing some prototyping sites (looking into developing my new swimbaits – which are coming along great, by the way). .  Anyway I found this site ‘Conquisatdor Tackle’ that I had not heard of before. It has some nice looking what looks to be high quality stuff.

The things that especially caught my eye were the 1 ton flippin’ jigs that come with a couple of their own custom trailers, as well as some little UV lights which I’m thinking of ordering for tying knots at night and on tournament mornings.

Check it out:

Conquistador Tackle

Chinese Astrology for Anglers

Dsc_0007_resize

There are tons of different fishing techniques out there. How the heck do you learn all of them to become a better angler? Here’s one trick that I have learned.

About ten years ago I realized I had all these different baits that I enjoyed using, but if you asked me my favorites, or more importantly, what I had the most confidence in, I was stumped. I decided I needed to do something. So, you know how the Chinese have the different animals representing different years? Well I took that idea and added a fisherman’s twist. For me, it was now a different bait for each year. From that point on I picked a new bait at the beginning of each year and focused on learning it throughout the year.  I started off pretty dedicated. This was before I was fishing tournaments, so I was pretty literal, and I used that same bait more or less all the time. And for those of you who do not tournament fish, I recommend this to learn the intricacies of a single lure type.

My first year, I chose the crankbait. That year, that was pretty much all I fished. And by the end of the year, I sure knew a lot more about crankbait fishing. And better yet, I had a handful of baits that I had a huge amount of confidence in that I still carry with me today.

The next year was the year of the jig. Let’s just say, the next TWO years was the year of the jig. That’s how much I liked it. Today, you are going to find a jig rod on the deck of my boat pretty much all the time.

The year of the frog – sometimes baits are more season specific, and you’ll only be able to use them for a handful of months. I started that summer off with a bang. I went out on a guided trip on the Delta with Gary Dobyns, and got the low-down on frog fishing. That day I realized that Gary had probably forgotten more about frog fishing than I ever knew in the first place. These seasonal baits can be great because you can fish them really hard for a short period of time while the bite is phenomenal. This can build your confidence in a new bait really fast. But because of this, you may end up needing to spend a couple of years honing your skills during the on season. You can take advantage of this by rotating in a more fitting seasonal bait in the other months.

As I started tournament fishing, I was not able to intently focus on one bait as much any more, at least during competitions. But I still use my personal fishing time to focus in and learn new baits, and I still keep that one bait on my deck staring at me, and I use it any chance I get.

By intentionally limiting your lure choices like this, you’ll learn how a lot of techniques have similar uses, and over time realize the subtle differences as to when one might be slightly better than the other.

This has helped me a lot over the years, especially for learning techniques that I did not necessarily originally favor, such as the drop shot. Originally, I thought this was only a finesse fishing technique, but throughout my drop shot year  I adapted it in many new and different ways. And to this day some of my biggest fish on Clear Lake have been caught on my power drop shot.

So now as I get to the end of a couple of satisfying years getting to know the swimbait, I am gearing up for  new things for 2008. I have already started building up the arsenal, and I can now say that I am truly looking forward to the Year of the Rat.