Silver Leafing a Triple Trout 101

There has been a lot of buzz about foiled baits lately, and there are several ways of doing it. This is something I learned how to do years ago painting motorcycles.

The technique is thousands of years old and has not really changed all that much.

I will be leafing a Triple Trout that I stripped down added some gill detail, and enlarged the eyes.

Note: you will want to find the ugliest peice of fleece possible for a work suface.

Blog photos 93 suger loaf 047

You dont need much to do it - here is a list

  • Size (a glue that is used to apply the leaf)

  • an aplication brush (any brush that won't lose hairs)

  • a SHARP exacto knife

  • a piece of velvet or fleece

  • a big plush brush

 Blog photos 93 suger loaf 055

all of these materials can be fouind at just about any good craft store.

Start by brushing the size on to the area to be leafed. This will need to sit for roughly 10 minutes to tack up so the leaf will stick.

Blog photos 93 suger loaf 048

Once the size is tacky, very carefully lay the leaf down, and gently brush it into place, starting at the center and working out to the ends with the big brush.

Blog photos 93 suger loaf 064

Let the leaf set for a few minutes then go back and burnish (gently rub) it down with the soft cloth. This sets it in place permanently. Next, hit the edges with the big brush and kick off anything left beyond the size.

Blog photos 93 suger loaf 071

I recomend doing jointed baits one section at a time to avoid unwanted contact  between setions of the very fragile leaf.

Blog photos 93 suger loaf 082

Let the bait sit over night and then you're ready to paint. I did just a basic shad or hitch patern here for Clear Lake.

Make sure and use a good heavy clear coat to protect the fragile leaf. Once it is set up it is amazingly tough.

Blog photos 93 suger loaf 090 

More Lure Making & How-To posts on The Wired Angler:

How to Make Your Own Big Topwater Plug Bass Lure

Painting a Wooden Plug or Crankbait

Hobbytown for the Bass Fisherman

10 Ways to Rig a Basstrix Style Swimbait

Modifying an Osprey Swimbait to be Weedless

Jiggin’ Small Swimbaits

DSC_0312
Jiggin’ is not a term that you are used to hearing in reference to swimbaits, however in other areas of fishing – take saltwater rock fish for example – the term is used often when fishing baits on the bottom with a lead head.

Why not in bass fishing? Personally I consider any thing that has a lead head either in front of or cast into the head of the bait a type of jig.

In general this is a deep water technique for me. Fishing jigs for bass has been one of my favorite and most productive techniques for years now. So when I started fishing swimbaits I naturally gravitated towards fishing them on the bottom. After years of doing this I have refined quite a bit and have some tips for baits as well as gear to share with you.

The technique:

In general, when I am Jiggin’ swimbaits on the bottom I am fishing a bait fish imitator (a lot of baits fit this category). Some can be used right off the shelf and others require a bit of surgery. For the most part I fish this type of swimbait from the fall through winter. I focus mainly on steep rocky areas that hold shad and smaller bait fish. Most of the time I do one of two things: sitting out in 20 to 50 feet of water I cast to shore and bounce my lure down the bank, keeping bottom contact as much as possible. Most bites are going to come while the bait is falling between structures, so be sure to pay close attention to each and every thing you bump into. And most bites are going to be pretty light – more of a loss of contact with your bait.

Second, once I have caught a few fish I can usually establish a depth at which the fish seem to be hanging out in. At this point I will usually parallel the shore, dragging my swimbait at a consistent depth.

I have found this technique to be especially deadly on bodies of water that have spotted bass.

Berriessa spot swimbait

When to throw it:

I have found that from fall through winter there are times when bass relate more to bait fish than crawdads. Really there is no magic answer to knowing whether or not to throw the small swimbait verses a jig. I will start by looking at shad activity on my graph. If there are a lot of shad near the bottom usually in colder weather I have found this bite to be good. If the bass are really active and chasing shad up and down steep banks this is a great time to just stick with the bouncing the swimbait from shallow to deep.

The baits:

I have a handful of baits I like to throw, including the MattLures 6”soft swimbait, Megabait’s LA Slider with removable jig head baits 6”, River2Sea bottom bouncer 6”, MattLures Bluegill Ultimate, Maverick Lures 5.5” Minnow Swimbaits, and various tube body swimbaits with a lead head inserted. When using baits with a Jig head in front of the swimbait I prefer using a heavy heavy head ¾ oz or larger

DSC_0311

The heads:

When I first started fishing this way there were not too many heads on their market for small swimbaits. The market is flooded with them now, however I still prefer my old favorites. The Revenge Swimbaits Hedz, Kalins 1 oz triangle saltwater Ultimate Swimbait Jig, Blade-Runner tackle flat bottom Stand-Up Jig Head, and finally just your standard football style jighead. I prefer to have my jig heads powder-coated in brown or black just to blend in with the bottom rather than trying to make it part of my bait, the exception being the Revenge head. 

DSC_0329

The rig:

I prefer a rod that is very similar to a Jig rod; you want something with a bit of a back bone and a fast action tip. I also prefer a good quality blank since you will be dealing with a lot of subtle bites. I found that something in the 7’6” to 7’9” length fits my needs best. My favorite is my custom Rogue 796 Junior Swimbait Stick with a small graphite handle. I always fish 15 or 20 pound fluorocarbon line for the best contact with my swimbaits.
DSC_0332

New Snack Size Color Line-Up To Be Available at the Bass-a-Thon

I have been grinding away preparing baits for the 2008 Bass-a-Thon. I'll have a table up there with all the Snack Size Swimbaits on Saturday and Sunday, including a whole bunch of new colors. The new product website is also almost done and will be up by the end of the week.

Hopefully things will turn back to some sort of normalcy next week when I get back from Anaheim (meaning no more 12 hour days).

I figured I would share some of the new colors of the Snack Size Swimbaits that will be available at the Bass-a-Thon at Angler's Marine this weekend. I will also be bringing 10 Crappie and 10 Dark Bluegill in my new bait.

DSC_0090

Baby Bass

DSC_0096 

Shasta Trout

DSC_0100

Ayu

Hey – if you're headed to the Bass-a-Thon, be sure to stop by my table and introduce yourself!

More details on the Bass-a-Thon here

A Day On The Water With Cal From Tackle Tour

A few weeks ago I spent a day on the water with Cal from Tackletour.com

Cal has completed a write up and can be seen on their site.

Here is a video Cal edited together as well. Unfortunately the bite was non-existant but we had a great time and the video turned out great.

Link to Tackle Tour

Previous Tackle Tour post on The Wired Angler:

TackleTour Lure Preview of the Snack Size Swimbaits – Updated