Category: Swimbaits

Gliders: What Is All The Hype About?

Bass fishing trends change as fast as the weather – it seems like yesterday all you heard people talking about was the A-Rig.

With the web people's attention span seems to be a lot less than before, and there is always some new shiny thing a google or YouTube search away. This may not be blowing up as big as some trends but recently a lot of people have been talking about gliders. These baits are not new by any stretch of the imagination: muskie guys have been using them for years, their grandads were using them.

Though a lot of these lures are one piece the focus recently has been on the single joint gliders.

Photo(32)
                                                  A glimpse at some of my favorites

Years ago River2Sea released the S-Waver. This bait did not exactly create much of a roar among the bass fishing world. Most guys did not or still do not understand the lure or how to fish it. However, this bait has contributed to countless tourney wins and big fish catches over the years. To people more in the know the Gann Craft Claw has been a secret weapon for a long time as well. Recently Butch Brown has brought much attention to the swimbait word with the Depps Slide Swimmer. This bait started its life as the Silent Killer and people modified them into lipless gliders.

The Mechanics

At first cast these baits do not appear to do much they just kind of lumber slowly back and forth. Some whip back and forth quickly. More often than one would want in a lure their are a lot of duds straight out of the package. Not all gliders are created equal. You could have two of the same brand straight out of the package and chances are they will swim differently side by side. This is just the nature of these baits because of their simplicity.

Photo(34)
                                                     Some recent glider victims

Fishing the Gliders

Like a lot of swimbaits, these baits require a bit of attention to be paid during fishing. Retrieves can vary from a mind numbingly slow crank and pause to more of of an erratic jerk and crank style. Like most baits you have to see what the fish are responding to. These baits will pull a lot of fish to the boat before and even after you find the cadence the bass want on that particular day or time period. I prefer to impart most of my action into my gliders with just my reel handle for slow sinkers. I use the faster sinking baits to fish faster if the fish are unresponsive to the slow retrieve.

Photo(33)                                                     Shapes and sizes vary a lot

Like most treble hook baits you want fish these baits with a moderate rod. Some of these baits are quite big and your first thought would be to fish it on a heavy set up. A lot of the bites on these baits are very subtle and are reminiscent of crank bait bites. Some are gonna rip the rod away from you, it's just going to vary most of the time. You're going to want the forgiveness of that flexible rod.

Choosing the right glider

The glider market is a relatively small one in the bass fishing world, and some of my favorites are not even available. The River2Sea is the obvious answer to introducing yourself to them. This bait can be fished on a heavier crankbait or topwater rod. A step up from there are baits like the Rago Glidiator the Smith X Hitch or the Roman Made Negotiator.

Its hard to say whether or not these baits will stay mildly quiet or will become mainstream. My guess and hopes are that they don't catch on too big. Either way, I'll be catching big bass on these baits for years to come.

Send Me Your Videos And Pictures!

Nothing gets me more excited to keep making swimbaits than seeing pictures and videos of big bass being caught on my baits. Sometimes I get so excited that mysterious packages may show up at your door.

These packages may include new things, like prototype baits that no one has even seen before! So unless you're really slow and don't get the idea – get on it folks! Here are a couple great examples,enjoy.

You can send any pictures,videos or links to me at wiredangler@gmail.com.

How to Quickly Add a Red Gill to a Swimbait

There are many small things you can modify at home on your lures. A lot of these things are huge confidence boosters for me.

Most of these modifications just take to much time to try and do on the water, but there are a few ways to make them quick and efficient on the water.

Quick Bloody Gills

One of these small mods I like to do is add a red gill on my soft plastic swimbaits. I use soft plastic paint from LureCraft.

Blog pic 2
This paint comes in big containers that are frankly a pain in the ass to keep on my boat. So what I like to do is get an old nail polish bottle, rinse it out with acetone, then fill it up with the soft plastic paint. The containers have an application brush for quick easy on the water mods.

Blog pic 3
This works on all soft plastics including frogs and other topwater lures made of PVC.

Blog pic 1Shown here on a Little Creeper prototype 8" Trash Fish (Link to smaller version)

There are many colors available and I like to keep some green and black on the boat as well to add spots to trout baits or other details to frogs, etc.

Here's a link to the red I like to use: Colortech Red from LureCraft

Previously on the Wired Angler:

How to Make Soft Plastic Swimbait Eyes – Part One | Part Two

Custom Jigs Made Easy

How To Protect Your Cork Handles

Soft Swimbait Top Hook Maintenance

A lot of soft swimbaits use a single jig hook molded into the bait weight system. In the event of a run in with a rock or other hard cover the hooks do occasionally become damaged. A great thing to do is keep a high quality metal file in your boat or tackle bag. In the inevitable run in with your swimbait you can do a quick easy re-sharpening of your hook. The reason for the file over a sharpening stone is that you can get a much quicker sharper point back on your hook. To sharpen, hit each side first and then the top all with a forward motion.

Hook file blog 004
Hook file blog 006
Hook file blog 009
Shown here on a Matt Lures Catfish swimbait. This method will get a very sharp edge back on your swimbait.

In the event of a hook bending or loosing its point completely here's what to do:

Cut off the jig hook and run either a piece of 80 Pound braid or wire back to a fresh treble hook. I do this on a lot of my new swimbaits as well – I feel that at times it can increase your hook up and landing ratio. The reason for this is that the hook is will become detached from the bait. This will give the fish less weight to throw the bait.

Hook pictures blog 2 007
This Swimbait has the jig hook cut off and a size 1 3X Mustad Ultra Point has been added. I choose these hooks on my softbaits because of the strength and the straight points to increase hook up ratio.

More How To posts from the Wired Angler here

How To Make Soft Plastic Eyes For Swimbaits – Part Two

This is Part 2 of this post – Click here to read Part 1

Silicon Molds:

I left off the last post after pouring the silicon mold. Pulling the mold apart is super easy and will leave you with this.

Soft eyes part 2 078

Now for the tricky part: pouring them. Heat up some clear soft plastic in a Pyrex container. These are  availible at most grocery stores. Using a microwave is the easiest cleanest way to work with this small of an amount of material. Make sure and heat it up slow so you don't burn it.

Soft eyes part 2 043
Pouring them is a very delicate process and I guarantee you will mess up a lot. However, it does not take too long to get the hang of it. Remember: you are pouring the eyes lens up, so the top of your pour is the finish. A good pour will end up looking like this with a good covex edge across it.

Soft eyes part 2 041
It only takes a minute before they are ready to pull out of the mold and paint. Soft plastic paint is availible at Lure Craft on-line and is super easy to use. First paint the pupil of the eye with a small detail brush. I used black here.

Soft eyes part 2 049
Let the paint set for a few minutes then paint over the whole back side of the eye with the color of your choice, I used a silver pearl mix for these.

Soft eyes part 2 056
After letting them sit for 10 minutes or so they are ready to glue into your favorite bait.

Soft eyes part 2 064

Here is an eye before glue in the socket of a 3:16 Rising Sun. You will need to glue them in with Mend It Soft Bait Glue available at most fishing stores.

 

Soft eyes part 2 068
Cover the whole eye with Mend it and it will seap in beween the eye and the bait creating a very real look.

Soft eyes part 2 073
That wraps it up! The eyes are now permanently part of your soft plastic bait. They also have a soft, more natural feel to them.

Soft eyes part 2 075
FInd more great bait tips and tricks in the Wired Angler How-To Category

How To Make Soft Plastic Eyes For Your Soft Plastic Swimbaits – Part One

Ever wonder how some of your favorite swimbaits are made? Or maybe just small parts of them?

I am going to start a new series of articles on in depth how-tos for some of these techniques. The first is one that involves a lot of processes, but I'm sure a lot you have pondered. Ever wonder how those eyes on a Hudd are made? It took about a minute of thinking for me to figure out, but wouldn't that be cool if you could put them on any swimbait? The answer is Hell yeah it would, I thought about manufacturing them, but screw it – here you go:

I devised an easy way to make soft plastic eyes that can be permanently glued on your favorite soft baits. The bait I will be modifying is one of my favorites: the Rising Sun by 3:16 Bait co.

Rising Sun
You're gonna need a set of quality glass taxidermy eyes from a supplier such as Van Dyke's. Most baits take 8mm or 10mm. You are going to be casting them upside down to capture the paint pockets on the back. Here is a set of 8mm taxidermy eyes:

Soft eye pour 018
Soft eye pour 020
                          Notice the inset on the back of the eyes.             

You're gonna need a bit of modeling clay from a hobby or craft store. Flatten it on a work surface – I just use my bench but it can be done on a piece of cardboard or plexi. You can flatten it out with just about anything, really. I used a small piece of acrylic I had sitting on my workbench. After flattening the clay, carefully push the eyes face down. Push the eyes to the tip of the convex of the lens. Put them at least a inch apart.

Soft eye pour 025
Next, with a razor blade, cut a clean rectangular edge around the clay.

Soft eye pour 028
After the cut is complete you will need to build a fence around the clay to be filled with silicon. I made one really quickly out of some foam core and some more clay to hold it in place.

Soft eye pour 032

Now you are ready to pour the silicon in the mold. There are endless suppliers of silicon out there. Most hobby stores will have it in stock or you can get it on-line from suppliers such as Smooth On. Smooth On's OOMOO 30 is about the easiest to use silicone on the market. This is a consumer grade silicone that does not need to be vacuumed to release the trapped air. Most of the silicones I use in my shop are are a pain in the ass and very time consuming to use.

Mix up a small amount and fill the mold. Pour into one spot on the mold and let the silicon settle itself around the eyes. Some bubbles will rise, but should settle out. This is a really small mold – just be sure to follow the manufacturers directions very carefully.

Soft eye pour 035
Soft eye pour 046
Now the waiting begins. Most silicones will have to set for at least 12 hours to cure. In other words don't wait for it: go fishing or something. I will cover the rest in part two

Continue to Part 2

Introducing: Tactical Bassin’ from Matt Allen

Matt Allen a well known California trophy bass fisherman who has also contributed to The Wired Angler has just launched a new, video-intensive bass fishing blog called Tactical Bassin'. He's got a few videos up already with  more to come, including this one showing a bass hitting my JSJ 10" wake bait. The funny thing about this particular video is that I was on the phone with Matt when this bass hit the bait.

Welcome to the blogosphere, Matt.

TacticalBassin.com

Little Creeper Trash Fish A Cool New Little Swimbait To Check Out

Little creeper trash fish 
If you have not seen this baits and tried them yet I highly recommend that you do so. The baits are made by Little Creeper Bait Co. It is called the All American Trash fish,They come in many popular colors and are all hand made right here in Clear Lake Ca. Bennie the owner is currently working on a bunch of new bait designs including some flippin baits,crawdad imitations and a frog. The trash fish is currently available at Monster Fishing Tackle online. These are one of the best 6" class swimbaits I have ever fished.

Skeet Reese among several other Elite series pros have been quietly fishing these baits since the Clear Lake event earlier this year.