Category: How To

How to Quickly Add a Red Gill to a Swimbait

There are many small things you can modify at home on your lures. A lot of these things are huge confidence boosters for me.

Most of these modifications just take to much time to try and do on the water, but there are a few ways to make them quick and efficient on the water.

Quick Bloody Gills

One of these small mods I like to do is add a red gill on my soft plastic swimbaits. I use soft plastic paint from LureCraft.

Blog pic 2
This paint comes in big containers that are frankly a pain in the ass to keep on my boat. So what I like to do is get an old nail polish bottle, rinse it out with acetone, then fill it up with the soft plastic paint. The containers have an application brush for quick easy on the water mods.

Blog pic 3
This works on all soft plastics including frogs and other topwater lures made of PVC.

Blog pic 1Shown here on a Little Creeper prototype 8" Trash Fish (Link to smaller version)

There are many colors available and I like to keep some green and black on the boat as well to add spots to trout baits or other details to frogs, etc.

Here's a link to the red I like to use: Colortech Red from LureCraft

Previously on the Wired Angler:

How to Make Soft Plastic Swimbait Eyes – Part One | Part Two

Custom Jigs Made Easy

How To Protect Your Cork Handles

Soft Swimbait Top Hook Maintenance

A lot of soft swimbaits use a single jig hook molded into the bait weight system. In the event of a run in with a rock or other hard cover the hooks do occasionally become damaged. A great thing to do is keep a high quality metal file in your boat or tackle bag. In the inevitable run in with your swimbait you can do a quick easy re-sharpening of your hook. The reason for the file over a sharpening stone is that you can get a much quicker sharper point back on your hook. To sharpen, hit each side first and then the top all with a forward motion.

Hook file blog 004
Hook file blog 006
Hook file blog 009
Shown here on a Matt Lures Catfish swimbait. This method will get a very sharp edge back on your swimbait.

In the event of a hook bending or loosing its point completely here's what to do:

Cut off the jig hook and run either a piece of 80 Pound braid or wire back to a fresh treble hook. I do this on a lot of my new swimbaits as well – I feel that at times it can increase your hook up and landing ratio. The reason for this is that the hook is will become detached from the bait. This will give the fish less weight to throw the bait.

Hook pictures blog 2 007
This Swimbait has the jig hook cut off and a size 1 3X Mustad Ultra Point has been added. I choose these hooks on my softbaits because of the strength and the straight points to increase hook up ratio.

More How To posts from the Wired Angler here

How To Make Soft Plastic Eyes For Swimbaits – Part Two

This is Part 2 of this post – Click here to read Part 1

Silicon Molds:

I left off the last post after pouring the silicon mold. Pulling the mold apart is super easy and will leave you with this.

Soft eyes part 2 078

Now for the tricky part: pouring them. Heat up some clear soft plastic in a Pyrex container. These are  availible at most grocery stores. Using a microwave is the easiest cleanest way to work with this small of an amount of material. Make sure and heat it up slow so you don't burn it.

Soft eyes part 2 043
Pouring them is a very delicate process and I guarantee you will mess up a lot. However, it does not take too long to get the hang of it. Remember: you are pouring the eyes lens up, so the top of your pour is the finish. A good pour will end up looking like this with a good covex edge across it.

Soft eyes part 2 041
It only takes a minute before they are ready to pull out of the mold and paint. Soft plastic paint is availible at Lure Craft on-line and is super easy to use. First paint the pupil of the eye with a small detail brush. I used black here.

Soft eyes part 2 049
Let the paint set for a few minutes then paint over the whole back side of the eye with the color of your choice, I used a silver pearl mix for these.

Soft eyes part 2 056
After letting them sit for 10 minutes or so they are ready to glue into your favorite bait.

Soft eyes part 2 064

Here is an eye before glue in the socket of a 3:16 Rising Sun. You will need to glue them in with Mend It Soft Bait Glue available at most fishing stores.

 

Soft eyes part 2 068
Cover the whole eye with Mend it and it will seap in beween the eye and the bait creating a very real look.

Soft eyes part 2 073
That wraps it up! The eyes are now permanently part of your soft plastic bait. They also have a soft, more natural feel to them.

Soft eyes part 2 075
FInd more great bait tips and tricks in the Wired Angler How-To Category

How To Make Soft Plastic Eyes For Your Soft Plastic Swimbaits – Part One

Ever wonder how some of your favorite swimbaits are made? Or maybe just small parts of them?

I am going to start a new series of articles on in depth how-tos for some of these techniques. The first is one that involves a lot of processes, but I'm sure a lot you have pondered. Ever wonder how those eyes on a Hudd are made? It took about a minute of thinking for me to figure out, but wouldn't that be cool if you could put them on any swimbait? The answer is Hell yeah it would, I thought about manufacturing them, but screw it – here you go:

I devised an easy way to make soft plastic eyes that can be permanently glued on your favorite soft baits. The bait I will be modifying is one of my favorites: the Rising Sun by 3:16 Bait co.

Rising Sun
You're gonna need a set of quality glass taxidermy eyes from a supplier such as Van Dyke's. Most baits take 8mm or 10mm. You are going to be casting them upside down to capture the paint pockets on the back. Here is a set of 8mm taxidermy eyes:

Soft eye pour 018
Soft eye pour 020
                          Notice the inset on the back of the eyes.             

You're gonna need a bit of modeling clay from a hobby or craft store. Flatten it on a work surface – I just use my bench but it can be done on a piece of cardboard or plexi. You can flatten it out with just about anything, really. I used a small piece of acrylic I had sitting on my workbench. After flattening the clay, carefully push the eyes face down. Push the eyes to the tip of the convex of the lens. Put them at least a inch apart.

Soft eye pour 025
Next, with a razor blade, cut a clean rectangular edge around the clay.

Soft eye pour 028
After the cut is complete you will need to build a fence around the clay to be filled with silicon. I made one really quickly out of some foam core and some more clay to hold it in place.

Soft eye pour 032

Now you are ready to pour the silicon in the mold. There are endless suppliers of silicon out there. Most hobby stores will have it in stock or you can get it on-line from suppliers such as Smooth On. Smooth On's OOMOO 30 is about the easiest to use silicone on the market. This is a consumer grade silicone that does not need to be vacuumed to release the trapped air. Most of the silicones I use in my shop are are a pain in the ass and very time consuming to use.

Mix up a small amount and fill the mold. Pour into one spot on the mold and let the silicon settle itself around the eyes. Some bubbles will rise, but should settle out. This is a really small mold – just be sure to follow the manufacturers directions very carefully.

Soft eye pour 035
Soft eye pour 046
Now the waiting begins. Most silicones will have to set for at least 12 hours to cure. In other words don't wait for it: go fishing or something. I will cover the rest in part two

Continue to Part 2

Custom Jigs Made Easy

I have tied my own jigs since I was a kid and have always enjoyed sitting down and refilling my jig box every year. I recently did just that and took a bunch of photos of the process.

Years ago, jig tying was a pretty basic thing. You had your choice between a handful of different heads in various weights and sizes. Now there is a plethora of head designs, skirt colors and materials; different hook set ups, different weed guards – the list is a mile long. There are also a million different jig companies out there, with some standing far above the rest. However, I still prefer to make my own.

Here's my process:

First off you have to sit down and order everything.

There are a two suppliers that I prefer: Stamina, now "Lure parts online", and Netcraft. I have been using both suppliers for years now and both are easy companies to deal with that have a lot of products for tying your own jigs.

I first pick my heads and weights and I recommend you buy in bulk to save money. Think ahead for next year – the investment may cost you a little more up front but when it comes time to replenish your jig box you'll be glad you have more supplies on hand.

At this point you should choose whether or not you are going to buy pre-painted jig heads or custom paint them yourself. If you finish them yourself there are a few options: you can powder coat them, dip them in vinyl or other finish, or spray with a number of different paints. I have switched to painting them with vinyl paint I feel it holds up the best on the lead. Powder coating eventually chips off as the lead dents, where the vinyl is a softer finish and seems to stay on longer as the jig head gets beat up.

Bait pictures 007
Bait pictures 010 Note: Most vinyl finishes are really thick and will need to be thinned to spray out of an airbrush. 

Now for the skirt material and colors:

I used to use all rubber, but I switched to round rubber when that came out, and I recently made the switch to silicone skirts. The color selection is endless and I really think color is one of the most important things in a jig. As far as colors go, I have my favorites that I have used for years but I am always trying to match crawdads and forage from lakes whenever I get the opportunity.

127 

Above: Here's a color model from a local lake. Below: As I paint my jig heads I prefer to first coat them in white vinyl paint.

Bait pictures 012

I use straws to keep the paint off of my weed guards.

Bait pictures 077

I will just hang the jigs upside down by the hooks as I paint them.Once the primer coat is on the skies the limit as to what you can do.

Bait pictures 016

This is a 1/2 ounce shad colored swim jig head.

After the heads are all painted it's time to start laying out your colors. I try to use a lot of colors and material on my jig for a full-bodied bait. This is, of course, all personal opinion and the main reason I tie my own jigs to begin with.

I like to lay everything out before starting in batches.

Bait pictures 018

Bait pictures 019

I use the very simple method of tying my jig skirts with a pointy jig skirt tool and a silicone band.

Bait pictures 023

Once the skirt is tied up its ready to slide on your jig.

Bait pictures 029

After its done you can see how all the colors melt together into a perfect harmony of fish-catching goodness.

Bait pictures 030

One of my swim jigs also shown with a Little Creeper swimbait trailer I matched it to.

Bait pictures 052

Tying your own jigs can be a fun and rewarding thing, it can also save you hundreds of dollars at the register of your local tackle store. Have fun!
  
  

Breaking Down A Topwater Bite

Blog photos rats and topwater 018
It's the time of year where a lot of us will find ourselves picking up our topwater rods before anything else. The weather in California this year has been less than stable and we all know stable weather can create an epic top water bite.

I have been finding that I can still catch a lot of topwater fish but I have been having to refine and make small adjustments to turn missed fish in to fish in the boat. My first choice is almost always going to be a big swimbait but that is not really what I'm going to be talking about.

Searching  

You have to start somewhere: my bait of choice for years has been the Super Spook. Recently I have been fishing the new 5" Lunker Punker a lot with mixed results. This is an amazing over all bait and I have caught a lot of fish on it – I'll come back to this later. The reason I like the walking baits to start is the draw power they have. Even if fish don't commit to these baits they will pull a lot of curious fish up. The reaction I get will either tell me to just stick with or or start refinement, then I will start to experiment with baits that make a different sound.

We all fish loud baits, but how often do you stop to think about what effect different rattle configurations have to do with with fish caught?

Refinement 

Going back to earlier when I mentioned the mixed results with the 5" Punker: This has nothing to do with the action of the bait, but the sound it and other baits put out. There are times when a bait like a Super Spook will out perform any other. The reason behind this is the single knocker ball. I refer to these baits as 'one knockers'. I don't know what it is about a summer bite sometimes that bass will not touch anything but a bait with a single knocker. The same applies with bigger bait to an extent as well, however I feel the size of the bait overcomes the sound a lot in this situation. This being said I am referring to baits in the six to seven inch and larger class.

Color

Color for me is really important, and depending on the time of year fish key in on different prey. This time of year through fall baby bass is a good universal color. Matching your local body of waters shad is a must sometimes. It is a good idea to do research on what your favorite lakes shad population look like.

Size

Size can be a huge determiner in how many bites you get when your keying in on feeding fish for example. This usually applies to schooling fish more than the occasional fish you will pick up covering a lot of water.

Popping baits

When fish are just not committing to a walking bait, it may be time to slow down and make a commotion. I love fishing poppers, some of my favorites are the Pop Max by Mega Bass. These are good baits for followers because they are a little more erratic in there stop pop and go motion.

Blog photos rats and topwater 027                 A couple Mega Bass Pop Max Poppers

Buzz Baits

There is nothing more basic and easy to fish than a buzz bait. When fishing around cover and structure they can be hard to beat. I really think fish just can't stand these baits and just hit them to stop the screeching in their ears sometimes. These are great baits to run past structure that feels as if it could be a bass's living room.

Location

Location has to be one of the most important things to me when fishing topwater. Pay close attention to bottom structure, wind, current, cover, heat concentration on the surface, etc. Topwater bites can be very specific- just because they are hitting on top real good in one area of the lake does not mean they will in another.

Pay attention to the detail and see if you can put together a pattern. Are the fish on points over bottom structure change? Are they suspending over under water trees, grass, or stumps? The devil is in the details.  Remember fish are coming out of their comfort zone to eat your lure, so you want to position yourself and casts in such a way that fish feel like they have the upper hand.

Don't pigeon hole yourself

We all have our favorite baits and it is awesome when they work the way we want. It is important to keep an open mind and read the strikes you are getting and make refinements. I am certainly guilty of trying to force a bite I want to happen, fishing swimbaits has really made me a lot more stubborn so I have to force myself to adjust at times.

Blog photos rats and topwater 025 Some "one Knocker single rattle baits" a Super Spook, Spook Jr and a Zenith Z Claw

Blog photos rats and topwater 029

Throw Topwater All Day

To me, topwater is not just a low light technique. I throw topwater for bass all day long. Keep note at cloud cover and sun exposure each time you get a bite. You will be amazed at how many bites you will get in the blazing mid day sun.