Author: Josh St. John

Big Swim Jiggin’ Techniques

Swim Jigs
Recently I started fishing swim jigs which have been gaining in popularity over the last few years. I personally have been so distracted by fishing swimbaits that I hardly gave it the time of day. I think this was mostly due to me being sort of close-minded and thinking of them as a conventional technique. Well my eyes have been opened and I figured I would share the light.

I was introduced to big swim jigs with pretty big swimbait trailers. Not only was this different but the way they can be fished is slightly different than what may traditionally come to mind. When you search the aisles at your local fishing store most of the swim jigs you will find are not only relatively small but usually not very heavy either. Most of the time they max out at 3/4 oz which is fine for shallow water and keeping from getting hung up, but what if you want to fish deeper and still fish fast. The answer, coming from the saltwater market is a jig that is no different from a conventional bass jig except they start at 3/4 of an ounce and go up from there – in fact they go all the way up to 2 oz.

These are the Slayer Swim Jigs by War 

Swim Jig with swimbait trailer 

Here's what and how I have been doing it and why this jig and trailer fits the bill. First off these jigs start with a 5/0 Mustad Ultra Point and go all the way up to a 7/O. This accepts a 5" top pour swimbait trailer which is the key to this rig and how its fished. The trailer I use is a commercially available swimbait mold from Lure Craft. I pour my own so this may not be the best choice, a roboworm swimbait or Optimum diamond shad may be a good choice as well.

swimbaits 

I target ledges on breaks, docks and rock outcroppings with this bait. Not what you may typically think of as swim jig water, but so far the results have been great. The great thing about the heavier weights on these swim jigs is the ability to fish them fast and keep them at deeper depths without them rising up away from your target area. I also fish these baits on a small swimbait rod or a heavy jig rod to be exact. I use a Powell 7'10", 5 power one piece flippin pitching rod. The retrieve on this bait is somewhere between hopping a jig a slow rolling a swimbait. Just like either of these baits you have to play around with the retrieve to see what the fish want on any given day.

swimjigs with swimbait trailers
This bait has some huge potential and I hope you guys take this chance to pick some of these jigs up and give this technique a shot.

Introducing Matt Allen

Matt Allen bass fishing

I am proud to announce a new author to The Wired Angler, Matt Allen. Matt is one of the most talented big fish hunters I know in Northern California. Stay tuned as Matt will be sharing big fish catching tips and tricks and much more.

I will still be writing and posting as normal – we also have big plans for the site in 2010 and this is just the first step.

To give you an idea of the kind of fish Matt catches, here is a link to his photo gallery Link

Lure Keep Tips

I am pretty rough on my fishing rods and reels, and over the years I have ripped many lure keeps off rods. With their extra weight, swimbaits in particular have a tendency to destroy the small wire hook keeps. I have come up with a couple ways of dealing with this problem and thought I would share with you.

Wired Angler Lure Keep Tip

The first can be done by simply drilling about an 1/8" hole in your casting rod trigger. This is pretty straight forward and does not require any special tools. This also keeps your rods a bit less top heavy when on the deck of your boat.

Lure Keep Tip

The second lure keep will require a little bit more. I simply double up on a large 1/4" size stainless steel hook keep and re wrap the base of the rod. This is obviously a bit more time consuming and requires more special tools. This method is quite strong and will hold up to heavy baits.