Author: Josh St. John

Return from the HBC Clear Lake CA

I just got back from the HBC last night up in clear lake. I would like to start by saying Ron and his entire list of sponsors put on a really cool event.

I did not sign up in time to fish this event so I signed up as a camera boat. They ended up being short VTO’s so I did not get the opportunity to shuttle around the camera crew, but had a great day anyway.
We ended up going to different parts of the lake in case there were any surrendered fish that needed to be turned over. This is a rule that is specific to the HBC. Link

I was assigned to the rattlesnake arm of Clear Lake. Ron said it was ok for us to fish so I got a couple hours in. I ended up changing out hooks on my crank baits.  I then messed around with my new Hummingbird 997 for a good portion of the morning.

I had not been down to that end of the lake in while so it was kind of nice. I got bored after a while and came to the conclusion that no fish were going to be surrendered.  And if they needed me -Hell , my boat does 70mph. No big deal.

I headed north where I met up with Matt Allen, who I had just met that morning.
Matt is no stranger to fishing big baits and fished the HBC 1 down south.

He was fishing an area I told him about and had apparently killed them there that morning. I guess we should have both been fishing this tournament because each of us had a couple Bass in the 5 pound range just messing around with 3:16 JR and the Snack Size Chartreuse Shad.

071

As boats started heading back towards the north end, we did not want to get in the way of anyone participating in the event so we headed back to Konocti Vista where the event was being held.

Matt had volunteered to be the check in boat so we both grabbed all we needed and headed out in my boat.
We missed most of the weigh in but had fun talking to everyone as they came in.

Shaun Bailey took the HBC belt and a check for $10,000 with the big fish weighing 9.01. Robert Cepek came in third with 8.21. Jerry Ballesteros came in third with 7.52 and worm-chuckin’ Scott Green came in fourth with 7.20. If Scott had not just caught a 14 pounder on a worm a couple months back I would be making a lot more fun of him right now. They say size does not matter, Scott so don’t feel bad.

Here is a Link to the Full list of results.

I met a lot of great people at this event and would love to fish the next one if it wer at freakin’ Amistad. They are however raising the bar to a $1,000 entry fee and a $50,000 winner-take-all prize pot, so we will see what happens.

I will leave you with a picture of the swag bag all the competitors and camera boat guys got just to make you jealous.

091
I do have to say though it made it extra worthwhile.

Modifying an Osprey Swimbait to be Weedless

DSC_0010
Here is a quick easy way to make one of the original large soft plastic swimbaits weed less.
Starting off by showing the Standard hook set up on a 6” Osprey Swimbait .

This modification requires a 10/0 Lake Fork Trophy Lures Swimbait hook, some Mend It soft bait glue and a small piece of a drop shot or similar worm.

Step 1

DSC_0014

Gently work the lead through line through sinker out of the bait.

Step 2

DSC_0021

Cut about a one inch section off the head of a RoboWorm or similar size worm to the old weight.

Step 3

DSC_0022

Squeeze some Mend It and glue into the old weight cavity and insert the small piece of worm into the hole.

 At this point you want to glue up the hole in the nose real well so the head of the new Lake Fork Swimbait hook will have good amount of plastic to bite into.

Step 4

DSC_0029

DSC_0030

The rest is pretty self explanatory, Just push in the head of the hook and pin it through the back of the bait. You can leave the hook a little exposed or bury it into the back of the bait slightly.

DSC_0043

More Tips & How-To posts on The Wired Angler:

How to Make Your Own Big Topwater Plug Bass Lure

Painting a Wooden Plug or Crankbait

Basic Boat Repair – Part One: Fixing Minor Dings and Chips

Basic Boat Repair – Part two: Fixing Minor Dings and chips

10 Ways to Rig a Basstrix Style Swimbait

 

TackleTour Lure Preview of the Snack Size Swimbaits – Updated

005

Last night Cal from TackleTour posted a preview of the Snack Size Swimbaits.

For those of you who do not know of TackleTour, it is one of the most in-depth tackle and fishing review websites on the web.

They concentrate largely on the bass fishing industry, but also cover a lot of bay and delta related items as well.

I have had an overwhelming response due to the write up, so I figured I would go ahead and give more details on the bait:

The bait is currently available at the following locations

Jig-Monster.com

Monster Fishing Tackle at OutdoorProShop.com

Tackle It in Lakeport, California

Oroville Outdoors, Oroville Ca

Hi's Tackle Box in San Francisco (and online)

Coming soon to
USACProShop.com and BassTackleDepot.com

I am currently putting in 12 hour days so I do not fall behind on production. I will be putting together a website which will hopefully be up by the end of this week or for sure by next week.
This site will be updated over the next month to give the full rundown on the bait.

  • Where to get it
  • How to fish it best including video
  • Contact and company info
  • How the bait came to be, etc
  • Full line up of colors in production

The web address will be JSJBaits.com

Although the full company name is JSJ Bait And Tackle, I wanted to have an easy to remember address.

For now, read the preview on TackleTour

As always – please let me know your feedback in the comments thread or email me

Fluke Fishing For Bass

DSC_0009 (2)


When the fishing gets tough from post-spawn through the summer, one of my go-to baits is the Fluke or Fluke-style baits.


Something about the subtle action of this bait can really trigger lethargic fish into striking. One scenario that comes to mind for me happened just last weekend at Clear Lake.


It was the middle of the day, and we were fishing shallow in the weeds. The outside temp was pushing one hundred degrees and the water temp was in the seventies. I could not buy a bite on a frog.


I know the area is loaded with fish, so I started to throw a big swimbait to draw the fish out. This worked, but the fish did not want to eat it. At this point I downsized to a Bass Trix swimbait on a Falcon 1/4 oz hook. The fish were a little more interested, so I knew I was close.


They would follow the Bass Trix and swipe at it, but did not want to commit to it either. This is where the Fluke comes in.


What the Fluke does is something that not too many baits can do.  It can be set up to turn at the twitch of your rod tip. On this particular day, that was all it took to trigger followers into strikers. By turning the bait and facing the following fish it was enough to trigger strikes from an otherwise  non-committal fish.
I prefer using the big Fluke style baits from Bass Assassin.
Here is the set up:


 The hook must be set back about an inch on the bigger baits and about a half inch on the smaller baits from the nose of the bait. In order to do this you must push the eye of the hook through the bait, tie your knot and then pull your hook back in.


DSC_0016 (2) The 7″ Bass Assassinand witha 6/0 1/4 Falcon hook and the 5″ Zoom fluke with a 2/0 Falcon 1/32 oz hook.


Another thing this hook set-back allows you to do is walk the fluke under the water – just like walking a fluke on the surface, using short twitch and pause motions. The bait will also sink in a circular motion.


These baits can also be fished weightless on the surface as a subtle clear water lure. This is perfect for shallow water site fishing when the fish are mindlessly cruising.


The great thing about the Fluke is that it can be set up weedless. I prefer using the bottom weight Falcon hooks in as big a size you can get away with without hindering the action of the bait.


I fish the big Bass Assassin Fluke style baits on a 7′ casting medium-heavy rod with a fast tip, paired with 15 pound CXX P-line or 50 pound braid. A Senko or topwater spook rod will work perfect.


The smaller Zoom Flukes I like to fish on spinning tackle. I use a 7′ medium-heavy rod with a fast tip as well, this time with 30 pound braid. This is so I can horse fish out of the weeds if needed.


The thing I like about Fluke fishing this time of year is that is that a lot of times it involves sight fishing in clear water and you get to see a lot of the fish react and hit your bait.


Give the Fluke a try – it may turn a slow day into a great day on the water. Let me know if you have any Fluke tips in the comments or email me, and I’ll share them.



 

Snack Size Trout Takes 3rd at Won Bass Clear Lake Swimbait Tourney

DSC_0019

Our biggest of the day, just under six pounds

I fished the Won Bass swimbait only tourney with Steve Reed (the admin on Swimbaitnation) on Saturday and we took 3rd place.

We fished the Chartreuse shad Snack Size Trout wake bait all day and came in with 19.80 total. We must have had at least 20 fish come up and attack our baits. The bite was on fire.

The fish are hanging out on vertical offshore weed growth right now and are spreading out more and more each day. There was no real key spot so we had to just cover a ton of water in one huge cove on the north end.

‘Weed-Eating Weevils to Prove Their Worth With Invasive Milfoil’

Marin IJ Weevils

The headline above from the Marin IJ caught my eye on my lunch the other day. The story talks about controlling milfoil with beetles:

"One solution under study is importing a weevil – an aquatic beetle – which feeds on the plant, killing it"

The first thing that came to mind even before I read the story was the fact that the Cal Delta just got sprayed to thin out the weeds, particularly in the Franks Tract area.

As bass fisherman we love weeds - to a point anyway. It does become an issue though when you can't get across certain parts of the delta at low tide without risk of overheating and blowing up your outboard.

I thought this was an interesting story and was honestly suprised we have not heard more about these little creatures.

heres the Link

New Monster Tackle Site and Forum

Monster tackle logo

Outdoor Pro Shop up in Rhonert Park has put together a great online store called Monster Tackle.

The website is full of all kinds of great stuff,  including a bass fishing forum, cool new product video and lots of new tackle.

They doing a promotion listed here for joining the forum

– Every 10th Registration receives a 1 time 10% off purchase code
– Every 25th Registration receives a 1 time 25% off purchase code
– Every 100th Registration receives a $100 gift Card for MonsterFishingTacke.com
– Every 1000th Registration receives a $200 gift Card for MonsterFishingTackle.com

. . And I am happy to report that they are also carrying the Snack Size Swimbaits.

Check them out

Link

Japanese-Made Lunkers Club Topwater Baits

 

DSC_0012

Being a lure designer myself, I am fascinated by lure design – especially those lures made in Japan. Some of the most innovative designs and paint schemes I have seen have come from Japan.

One of these is the Lunker’s Club line of poppers. Rumor has it that the owner of the company tragically died, although I cannot confirm this as fact myself.  In any event, the lures are not made anymore but I have collected a number of them over the years.

The foil finishes and paint schemes are really without a doubt the most realistic finishes I have ever seen on any baits, hands down. 

The baits themselves are very unique as well. The poppers I have and that are shown here are a 4”bait made of solid wood.